IEC Class B 3D interferometer test Sc-MTRJ female Om1/Om2 mm fiber optic patch cord

IEC Grade B 3D Interferometer Tested SC-MTRJ Female OM1/OM2 MM Fiber Optic Patch Lead Patch Cords are used to provide optical connection for fiber optic electronics. The use of the patch cord provides a quick and easy method for routing fiber patches in data centers, head-ends, cellular hubs and central offices. The patch c

Featured Products

IEC Grade B 3D Interferometer Tested SC-MTRJ Female OM1/OM2 MM Fiber Optic Patch Lead 

Patch Cords are used to provide optical connection for fiber optic electronics. The use of the patch cord provides a quick and easy method for routing fiber patches in data centers, head-ends, cellular hubs and central offices.

The patch cord can be used in interconnect or cross-connect path connecting the incoming fibers to the electronic equipment and providing patching within the fiber paths.  

The 9/125μm single mode fiber patch cord meets RoHS compliant, and all cables are 100% optically tested for insertion loss to ensure high quality, it is very cost-effective for network cabling.

Products info
 
ConnectorSC-MTRJJacket OD2.0mm
Fiber Mode9/125μmJacket ColorOrange
PolishUPC to UPCWavelength850/1310nm
Cable TypeDuplexJacket MaterialLSZH
Insertion loss≤0.3dB(max)Interchangeability≤0.2dB
Return loss≥50dB(min)Vibration≤0.2dB
Operating temperature-40~75°CStorage temperature-45~85°C
PolarityA(Tx) to B(Rx)Fiber GradeOM1/OM2

Length tolerance: 0-5M: +5cm/-0cm ;  5-100m:+10cm/-0cm


IEC Grade B 3D Interferometer Tested Sc-MTRJ Female Om1/Om2 mm Fiber Optic Patch Lead



We also provides a full set of OEM services, such as fiber connector, length, color, fiber grade, specification, material, package etc. 

Packaging & Labeling

IEC Grade B 3D Interferometer Tested Sc-MTRJ Female Om1/Om2 mm Fiber Optic Patch Lead




This easy to take and well-protected fiber optical cable package has been labelled and marked by OMC as default.

How to Choose The Right Fiber Optic Cable Type?
PS: The difference of OM4 and OM3 fiber mode as the following
1. OM4 was developed specifically for VSCEL laser transmission and allows 10 Gig / second link distances of up to 550 Meters (compared to 300M with OM3).
2. The effective modal bandwidth for OM4 is more than double that of OM3.
3. For OM4 patch cable it is 4700 MHz.km while for OM3 it is 2000 MHz.km.


 
DesignationFiber Dia.(μm)TypeFast Ethernet 100BASE-FX1 Gigabit Ethernet 1000BASE-SX1 Gigabit Ethernet 1000BASE-LX10Gbps Ethernet 10GBASE40Gbps Ethernet 40GBASE SR4100Gbps Ethernet 100GBASE SR4
OM162.5/125Multimode2000 Meters275 Meters550 Meters33 MetersNot supportedNot supported
OM250/125Multimode2000 Meters550 Meters550 Meters82 MetersNot supportedNot supported
OM3(Laser Optimized)50/125Multimode2000 Meters550 Meters550 Meters300 Meters100 Meters(SR4)100 Meters(SR4)
OM4(Laser Optimized)50/125Multimode2000 Meters550 Meters550 Meters400 Meters150 Meters(SR4)150 Meters(SR4)
Singlemode9/125Singlemode2000 Meters5km at 1310nm5km at 1310nm10km at 1310nmN/AN/A


How to correctly choose between PVC, LSZH and OFNP?
Fiber patch cables are now widely used for indoor applications like buildings, factories, office parks ,campuses and so on. Whether you choose PVC, LSZH or OFNP jacket depends on where you're going to run the cable.
IEC Grade B 3D Interferometer Tested Sc-MTRJ Female Om1/Om2 mm Fiber Optic Patch Lead

IEC Grade B 3D Interferometer Tested Sc-MTRJ Female Om1/Om2 mm Fiber Optic Patch Lead

IEC Grade B 3D Interferometer Tested Sc-MTRJ Female Om1/Om2 mm Fiber Optic Patch Lead

Contact:



 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours