MPO-MPO Singlemode 12 fibers MTP Fiber Optic Patch Cord
Model Number: MPO Singlemode
Inserion Loss: ≤ 0.5dB OM3 ; ≤ 0.6dB SM OS2
Connector-Type: High connectivity MPO
Cable type: 3.2 mm round LSZH jacketed cable
Connector End face: MPO end face geometry requirements: EN50377-15-1
Polishing Quality:: Polished end-face quality: IEC61300-3-35
Our MPO patch cables are designed for data center solutions supporting the topologies such as 10
Gigabit Ethernet, Fiber Channel or Infiniband - as specified in the data center standards EN50173-5 and
ISO/IEC 24764.
MPO Detail:
MPO patch cables are used to make the interconnections between the MPO cassettes or connections to active
equipment with MPO/MTP interface.
In cases where an MPO patch cord is connected (through an MPO coupler) to another MPO patch cable, one of
the two MPO connectors must be male (equipped with pins).
MPO patch cables are available in 3 different wire map configurations: Straight, Total Flipped or Pair Flipped
MPO patch cables are available in multi-mode and single-mode fiber cable.
Applications :
Disaster Recovery
Backbones
Building Fiber Optic Distribution
Quick setup of new wiring hubs
Warehouses
Performance of Assemblies MTP / MPO Termination:
Model Number: MPO Singlemode
Inserion Loss: ≤ 0.5dB OM3 ; ≤ 0.6dB SM OS2
Connector-Type: High connectivity MPO
Cable type: 3.2 mm round LSZH jacketed cable
Connector End face: MPO end face geometry requirements: EN50377-15-1
Polishing Quality:: Polished end-face quality: IEC61300-3-35
Our MPO patch cables are designed for data center solutions supporting the topologies such as 10
Gigabit Ethernet, Fiber Channel or Infiniband - as specified in the data center standards EN50173-5 and
ISO/IEC 24764.
MPO Detail:
MPO patch cables are used to make the interconnections between the MPO cassettes or connections to active
equipment with MPO/MTP interface.
In cases where an MPO patch cord is connected (through an MPO coupler) to another MPO patch cable, one of
the two MPO connectors must be male (equipped with pins).
MPO patch cables are available in 3 different wire map configurations: Straight, Total Flipped or Pair Flipped
MPO patch cables are available in multi-mode and single-mode fiber cable.
Applications :
Disaster Recovery
Backbones
Building Fiber Optic Distribution
Quick setup of new wiring hubs
Warehouses
Performance of Assemblies MTP / MPO Termination:
Type/Performance | Singlemode(APC polish) | Multimode(PC / Flat Polish) | ||
Standard | Elite Low Loss | Standard | Elite Low Loss | |
Maximum Insertion Loss | ≤ 0.75dB | ≤ 0.35dB | ≤ 0.60dB | ≤ 0.35dB |
Return Loss | ≥ 50dB | N/A | ||
Operating Temperature | -40°C to 80°C | 40°C to 80°C | ||
Test Wavelength | 1310nm | 850nm | ||